As an Amazon Associate I earn from qualifying purchases.
PPI #ad - The light is 2-5/16" x 6-7/16" oval, 1" thick 1-3/4" thick at wiring connection. Fit in a standard 2-1/2" x 6-3/4" oval hole. This sale includes 2pc of 6" red Oval Trailer Lights.
ProlinePPPI #ad - The light is 2-5/16" x 6-7/16" oval, 1" thick 1-3/4" thick at wiring connection. Fit in a standard 2-1/2" x 6-3/4" oval hole. This sale includes 4pc of 6" red Oval Trailer Lights.
Nilight #ad - 6” x2. For installation, and then connect the 3 wires to the corresponding wires on vehicles. Just make sure the hole size before you purchase. Universal application: work on a 12 v dc system, special vehicle, function as turn/Brake light, tail light for all kinds of trucks, horse trailer, dump Truck, semi-trailer, trailers, travel trailer, tractors, etc.
Upgraded unique design: nilight's tail light has unique “ears” on its two sides, and a tighter attaching ability between 3-prong plug and it. 75”". Easy installation: the taillight comes with grommets for surface mount, you just need to surface mount the grommets & light setup, also added a 3-prong watertight plug with attached wire.
Fit type: Universal Fit. Hole size for surface mount is: 6. Ready for the weather: be highly silicon sealed, IP67 waterproof rating, always be ready for different kinds of weather attack. These help the light fit perfectly and firmly on the grommet, upgrade notches on the inside of grommet, and the 3-prong plug attaches tightly on the light.
Partsam #ad - Easy installation the taillight comes with grommets for surface mount, also added a 3-prong watertight plug with attached wire. 10 leds per light 10 red led diodes in red lens; work on 12v dc, flash light, 3 wires with 2 steps brightness, Can Modify for Signal Light, Emergency Light Flasher relay or Controler not included ; Wiring Tips: Black Wire - Ground; Red Wire - high brightness; White Wire - low brightness;.
For installation, you just need to surface mount the grommets & light setup, and then connect the 3 wires to the corresponding wires on vehicles. Super brightness each tail light has 10pcs high-quality SMD LEDs to output super bright red light, high brightness for turn/brake light, low brightness for tail light, improving visibility and ensuring you a safer night.
Wide compatibility for almost all vehicles equipped with an 8-16 volt dc power source such as Semi truck, Mack and Lorries, UTV, buses, Service trucks, utility trailers, utility trucks, pick up truck, utility trailer, Kenworth, enclosed trailers, UTE, Freightliner, service vans, parade floats, International, Peterbilt, Semi-trailer, horse trailers, etc.3 functions & waterproof 7 1/4" l x 3 1/10" w.
Nilight #ad - 5” x 1. Awesome brightness: each tail light has 10 pcs high-quality SMD LEDs to output super bright red light, low brightness for Taillight, high brightness of Turn/Brake light, improving visibility and ensuring you a safer night. Fit type: Universal Fit. 6” x2. Shake proof, upgrade notches on the inside of grommet, and a tighter attaching ability between 3-prong plug and it.
These help the light fit perfectly and firmly on the grommet, there will be no worries of loosing light or wires. Easy installation: the taillight comes with grommets for surface mount, you just need to surface mount the grommets & light setup, also added a 3-prong watertight plug with attached wire.
Just make sure the hole size before you purchase. Upgraded unique design: niligh's tail light has unique “ears” on its two sides, and the 3-prong plug attaches tightly on the light. For installation, and then connect the 3 wires to the corresponding wires on vehicles. Hole size for surface mount is: 6. 75”. Universal application: work on a 12 v dc system, function as turn/Brake light, semi-trailer, tail light for all kinds of trucks, travel trailer, horse trailer, trailers, dump Truck, tractors, special vehicle, etc.
Nilight #ad - Awesome brightness: each light has 10 pcs high-quality smd LEDs to output super bright white light, low brightness for Taillight, high brightness for Reverse/Back Up light, improving visibility and ensuring you a safer night. Universal application: work on a 12 v dc system, trailers, tractors, travel trailer, horse trailer, tail light for all kinds of trucks, special vehicle, semi-trailer, dump Truck, function as the reverse /back up, etc.
Hole size for surface mount is: 6. For installation, and then connect the 3 wires to the corresponding wires on vehicles.
Shakeproof, and a tighter attaching ability between the 3-prong plug and it. Upgraded unique design: light has unique “ears” on its two sides, and the 3-prong plug attaches tightly to the light. These help the light fit perfectly and firmly on the grommet, upgrade notches on the inside of the grommet, there will be no worries of loosing light or wires. Ready for the weather: be highly silicon sealed, IP67 waterproof rating, always be ready for different kinds of weather attack.
ONLINE LED STORE #ad - Easier and faster - upgrading your old tail lights? putting lights on a new build? These surface-mount lights simplify the install process by eliminating the need for large oval holes. Multi-function - our amber and red lights offer two intensity levels to function as taillights or turn/brake lights, one intensity, while the white lights offer a straightforward, super-bright reverse/back-up light.
Confidence included - we've built confidence into each of our new 6" oval LED lights.
This attention to quality means that every light you install is safe, compliant, and legal. Equipped with 10 high-intensity LEDs and light-diffusing lenses, our new oval trailer lights are very good at their job. Just one small hole, four self-tapping screws, and you're done. Roadworthy - unlike many other lights on the market today, our surface mount LED lights comply with the DOT and SAE standards set out in FMVSS-108.
Nilight #ad - Awesome brightness: each tail light has 10pcs high-quality SMD LEDs to output super bright red/white light, low brightness for Tail light, high brightness for stop/turn/reverse light, improving visibility and ensuring you a safer night. Ready for the weather: silicon sealed, IP65 waterproof rating, ready for different kinds of weather attack.
For installation, you just need to surface mount the grommets & light setup, and then connect the 3 wires to the corresponding wires on vehicles. 6” x2. 5” x 1. Universal application: work on 12v dc system, travel trailer, trailers, tractors, special vehicle, function as reverse/back up, semi-trailer, dump Truck, tail light for all kinds of trucks, horse trailer, etc.7
Easy installation: comes with grommets for surface mount, also added a 3-prong watertight plug with attached wire. Hole size for surface mount is: 6. Upgraded unique design: light has unique “ears” on its two sides, upgrade notches on the inside of grommet, and the 3-prong plug attaches tightly on the light. Shakeproof, and a tighter attaching ability between 3-prong plug and it. These help the light fit perfectly and firmly on the grommet, there will be no worries of loosing light or wires.
Partsam #ad - Each oval tail light has 10pcs high-quality smd leds to output super bright red light, a hole about 6 1/3" need to drill to install it; Ready For The Weather: Be highly silicon sealed, IP65 waterproof rating, improving visibility and ensuring you a safer night; Dimensions: 7 1/3" x 3-1/8" x1 1/8"with grommets and 6 1/3" x 2"x 1"without grommets, always be ready for different kinds of weather attack;.
Warranty: we truly offer 1 year warranty for these led oval trailer tail lights! If have any questions or issues about our led tail lights, Please feel free to us and we will reply in 24 hours;. Easy to install: black wire is the ground, red wire is the high brightness for stop turn brake lights and White Wire is the low brightness for tail or running lights; Versatile flush mountable with the included rubber grommet allows the 6 inch oval led trailer light to be installed in both horizontal and vertical orientations.
Package includes 10 pieces 6 inch oval led Stop Turn Tail Lights Red, Rubber Grommets and 3-prong wire pigtails are included for complete installation;. This oval led tail light is compatible with almost all automobiles and devices equipped with a 8-16 volt dc power source such as Semi Truck, freightliner, Semi Trailer, Service Van, UTV Peterbilt, Pick Up Truck, Utility Trailer, Service Truck, Boat Trailer, Kenworth, Enclosed Trailer, UTE, Horse Trailer, Parade Float, international, Utility Truck, Bus, Utility Trailer, mack and lorries etc. ;.
LINKITOM #ad - Compliant with dot standards: the lamp shade of utility trailer light kit with corrosion resistant ABS material, Durable design for years of use. Install your lights in mere minutes. Brake& turn taillight: the red tail lights offer two intensity levels to function as parking lights or turn/brake lights.
Easy installation: standard 6" size. Super bright: 24 bright led diodes with super high visibility, light up the rear or side of your vehicle or trailer in daylight, midnight, raining or fog days.
Dimensions with grommet are approximately 7. 5”x 3. 25”x 2”. Waterproof and submersible: design of excellent sealed and IP 67 waterproof makes it be definitely waterproof. Improve the drive security and avoid accidents. Included black rubber grommet makes for an extra easy surface mount setup - no holes or screws required. Widely applicable to 80 inch width tractor, van, lorry, snowmobile, caravan, boat, bus, such as truck, trailer, etc.
1. PPI
#ad2 Red Trailer Truck LED Sealed RED 6" Oval Stop/Turn/Tail Light Marine Waterproof Including 3-pin Water Tight Plug DOT SAE with Wires and Grommet
#adMore information #ad
Grommet fits standard mounting position. 10 led super diodes for each light. Waterproof submarine Includes 3-pin water tight plug with wires. Meets all applicable DOT/SAE standards and fit standard trailer light mounting position.| Brand | PPI #ad |
| Manufacturer | proline #ad |
| Height | 1 Inches |
| Length | 4 Inches |
| Width | 2 Inches |
| Part Number | CECOMINOD076167 |
| Model | CECOMINOD076167 |
More information #ad
2. ProlinePPPI
#ad4 Trailer Truck LED Sealed RED 6" Oval Stop/Turn/Tail Light Marine Waterproof Including 3-pin Water Tight Plug DOT/SAE with Wires and Grommet
#adMore information #ad
Waterproof submarine Includes 3-pin water tight plug with wires. Grommet fits standard mounting position. Meets all applicable DOT/SAE standards and fit standard trailer light mounting position. 10 led super diodes for each light.| Brand | ProlinePPPI #ad |
| Manufacturer | prolinepri #ad |
| Part Number | MGB |
| Model | MGB |
More information #ad
3. Nilight
#adTL-07 6 Inch Oval Red Led Trailer Tail Lights 4PCS 10 Led with Flush Mount Grommets Plugs IP67 Waterproof Stop Brake Turn Trailer Lights for RV Truck, Nilight
#adUpgraded unique design: nilight's tail light has unique “ears” on its two sides, and a tighter attaching ability between 3-prong plug and it. 75”". Easy installation: the taillight comes with grommets for surface mount, you just need to surface mount the grommets & light setup, also added a 3-prong watertight plug with attached wire.
More information #ad
5” x 1. Awesome brightness: each tail light has 10 pcs high-quality SMD LEDs to output super bright red light, low brightness for Taillight, high brightness of Turn/Brake light, improving visibility and ensuring you a safer night. Fit type: Universal Fit. Hole size for surface mount is: 6. Ready for the weather: be highly silicon sealed, IP67 waterproof rating, always be ready for different kinds of weather attack. These help the light fit perfectly and firmly on the grommet, upgrade notches on the inside of grommet, and the 3-prong plug attaches tightly on the light.
| Brand | Nilight #ad |
| Manufacturer | Nilight #ad |
| Weight | 1.74 Pounds |
| Part Number | TL-07 |
| Model | TL-07 |
| Warranty | 2 Years Warranty |
More information #ad
4. Partsam
#adPartsam 4pcs Trailer Truck LED Sealed RED 6" Oval Stop/Turn/Tail Lights Flush Mount Waterproof Including 3-pin water tight plug with wires and Grommets Sealed
#adFor installation, you just need to surface mount the grommets & light setup, and then connect the 3 wires to the corresponding wires on vehicles. Super brightness each tail light has 10pcs high-quality SMD LEDs to output super bright red light, high brightness for turn/brake light, low brightness for tail light, improving visibility and ensuring you a safer night.
More information #ad
The hole size for the surface mount is: 6. 6" x2. 5" x 1. 75". Ip67 waterproof oval red led trailer tail light serves 3 functions: turn signal lights, stop brake lights, or just tail lights; flush mount with grommet and 3 prong wire pigtails. Wide compatibility for almost all vehicles equipped with an 8-16 volt dc power source such as Semi truck, Mack and Lorries, UTV, buses, Service trucks, utility trailers, utility trucks, pick up truck, utility trailer, Kenworth, enclosed trailers, UTE, Freightliner, service vans, parade floats, International, Peterbilt, Semi-trailer, horse trailers, etc.3 functions & waterproof 7 1/4" l x 3 1/10" w.
| Brand | Partsam #ad |
| Manufacturer | Partsam #ad |
| Part Number | GTCV-0462940331 |
| Model | 6 inch Red Oval Led Trailer Light Kit |
| Warranty | 1 year for quality issue |
More information #ad
5. Nilight
#ad2 Years Warranty, Nilight, TL-01 6" Oval Red LED Tail 2PCS w/Surface Mount Grommets Plugs IP65 Waterproof Stop Brake Turn Trailer Lights for RV Truck Jeep
#adThese help the light fit perfectly and firmly on the grommet, there will be no worries of loosing light or wires. Easy installation: the taillight comes with grommets for surface mount, you just need to surface mount the grommets & light setup, also added a 3-prong watertight plug with attached wire.
More information #ad
Ready for the weather: be highly silicon sealed, IP67 waterproof rating, always be ready for different kinds of weather attack. Just make sure the hole size before you purchase. Upgraded unique design: niligh's tail light has unique “ears” on its two sides, and the 3-prong plug attaches tightly on the light. For installation, and then connect the 3 wires to the corresponding wires on vehicles. Hole size for surface mount is: 6. 75”. Universal application: work on a 12 v dc system, function as turn/Brake light, semi-trailer, tail light for all kinds of trucks, travel trailer, horse trailer, trailers, dump Truck, tractors, special vehicle, etc.
| Brand | Nilight #ad |
| Manufacturer | Nilight #ad |
| Part Number | TL-01 |
| Model | TL-01 |
| Warranty | 2 Years Warranty |
More information #ad
6. Nilight
#ad2 Years Warranty, Nilight, TL-09 6 Inch Oval White LED Trailer Tail Lights 2PCS 10 LED w/Flush Mount Grommets Plugs IP67 Waterproof Reverse/Back Up Trailer Lights for RV Truck Jeep
#adHole size for surface mount is: 6. For installation, and then connect the 3 wires to the corresponding wires on vehicles.
More information #ad
Easy installation: comes with grommets for surface mount, you just need to surface mount the grommets & light setup, also added a 3-prong watertight plug with attached wire. 75”. 5” x 1. 6” x2. Just make sure the hole size before you purchase. Shakeproof, and a tighter attaching ability between the 3-prong plug and it. Upgraded unique design: light has unique “ears” on its two sides, and the 3-prong plug attaches tightly to the light. These help the light fit perfectly and firmly on the grommet, upgrade notches on the inside of the grommet, there will be no worries of loosing light or wires. Ready for the weather: be highly silicon sealed, IP67 waterproof rating, always be ready for different kinds of weather attack.
| Brand | Nilight #ad |
| Manufacturer | Nilight #ad |
| Part Number | TL-09 |
| Model | TL-09 |
| Warranty | 2 Years Warranty |
More information #ad
7. ONLINE LED STORE
#ad2pc 6 inch Red Oval LED Trailer Tail Light Kit DOT FMVSS 108 SAE S2T2I6 Surface-Mount IP67 Waterproof Stop Turn Tail Trailer Brake Lights for Boat Trailer RV Trucks
#adConfidence included - we've built confidence into each of our new 6" oval LED lights.
More information #ad
Sonically sealed and boasting an impressive IP67 rating, weatherproof, these lights are submersible, and ready for years of service. Be seen - tail lights have one job, to keep you visible and safe, and how well they do that job depends on how bright they are. This attention to quality means that every light you install is safe, compliant, and legal. Equipped with 10 high-intensity LEDs and light-diffusing lenses, our new oval trailer lights are very good at their job. Just one small hole, four self-tapping screws, and you're done. Roadworthy - unlike many other lights on the market today, our surface mount LED lights comply with the DOT and SAE standards set out in FMVSS-108.
| Brand | ONLINE LED STORE #ad |
| Manufacturer | ONLINE LED STORE #ad |
| Height | 4 Inches |
| Length | 7 Inches |
| Width | 6 Inches |
| Part Number | 6110-RD-X2 |
More information #ad
8. Nilight
#adNilight 4PCS 6" Oval LED Trailer Tail Lights 4PCS 10 LED w/Flush Mount Grommets Plugs Reverse/Back Up Trailer Lights for RV Truck Jeep
#adFor installation, you just need to surface mount the grommets & light setup, and then connect the 3 wires to the corresponding wires on vehicles. 6” x2. 5” x 1. Universal application: work on 12v dc system, travel trailer, trailers, tractors, special vehicle, function as reverse/back up, semi-trailer, dump Truck, tail light for all kinds of trucks, horse trailer, etc.7
More information #ad
75”. Just make sure the hole size before your purchase. Easy installation: comes with grommets for surface mount, also added a 3-prong watertight plug with attached wire. Hole size for surface mount is: 6. Upgraded unique design: light has unique “ears” on its two sides, upgrade notches on the inside of grommet, and the 3-prong plug attaches tightly on the light. Shakeproof, and a tighter attaching ability between 3-prong plug and it. These help the light fit perfectly and firmly on the grommet, there will be no worries of loosing light or wires.
| Brand | Nilight #ad |
| Manufacturer | Nilight #ad |
| Part Number | TL-24 |
| Model | TL-24 |
| Warranty | 2 Years Warranty |
More information #ad
9. Partsam
#adPartsam 10Pcs 6" Inch Oval Led Trailer Tail Lights Red 10 Diodes Grommet and Plug Waterproof Turn Stop Tail Brake Trailer Lights Replacement for RV Trucks
#adWarranty: we truly offer 1 year warranty for these led oval trailer tail lights! If have any questions or issues about our led tail lights, Please feel free to us and we will reply in 24 hours;. Easy to install: black wire is the ground, red wire is the high brightness for stop turn brake lights and White Wire is the low brightness for tail or running lights; Versatile flush mountable with the included rubber grommet allows the 6 inch oval led trailer light to be installed in both horizontal and vertical orientations.
More information #ad
You just need to surface mount the rubber grommets & oval tail light setup, and then connect the 3 wires pigtails to the corresponding wires on vehicles;. Package includes 10 pieces 6 inch oval led Stop Turn Tail Lights Red, Rubber Grommets and 3-prong wire pigtails are included for complete installation;. This oval led tail light is compatible with almost all automobiles and devices equipped with a 8-16 volt dc power source such as Semi Truck, freightliner, Semi Trailer, Service Van, UTV Peterbilt, Pick Up Truck, Utility Trailer, Service Truck, Boat Trailer, Kenworth, Enclosed Trailer, UTE, Horse Trailer, Parade Float, international, Utility Truck, Bus, Utility Trailer, mack and lorries etc. ;.
| Brand | Partsam #ad |
| Manufacturer | Partsam #ad |
| Part Number | GTCV-0024969638 |
More information #ad
10. LINKITOM
#ad6 Inchs Oval Trailer Lights, Super Bright Red 24LED Brake Turn Stop Marker Reverse Tail Lights with Waterproof Rubber Gaskets for Boat Trailer Truck RV DOT Certified IP67 2 Pack
#adEasy installation: standard 6" size. Super bright: 24 bright led diodes with super high visibility, light up the rear or side of your vehicle or trailer in daylight, midnight, raining or fog days.
More information #ad
Each light comes with an industry standard connector with 12" of wiring for installation. Please make sure wires connect correctly and no electronic short before underwater. 100% compliant with DOT standards. Dimensions with grommet are approximately 7. 5”x 3. 25”x 2”. Waterproof and submersible: design of excellent sealed and IP 67 waterproof makes it be definitely waterproof. Improve the drive security and avoid accidents. Included black rubber grommet makes for an extra easy surface mount setup - no holes or screws required. Widely applicable to 80 inch width tractor, van, lorry, snowmobile, caravan, boat, bus, such as truck, trailer, etc.
| Brand | LINKITOM #ad |
| Manufacturer | Linkitom #ad |
| Part Number | C2T24 |
More information #ad
